Ordinance 2022-1845 - Laserfiche WebLink

Home Browse Search

PT104 Renewable Energy. On -site renewable energy generated bra system installed as part of this project that is used by the building shall be subtracted from the proposed designgy consumption prior to calculating the proposed building_ performance. PT105 Performance documentation. Documentation to verify compliance with this section shall be provided to the code official. PT105.1 Proiected compliance report. Permit submittals shall include a report documenting the proposed design is projected to meet the EUI target. The compliance report shall include the following specific information beyond the information required in ASHRAE 90.1 Appendix G: 1. Address of the building. 2. An inspection checklist documenting the building component characteristics of the proposed design. 3. Name of individual completing the he report. 4. Name and version of compliance software tool. 5. Documentation of the reduction in energy use associated with on -site energy. PT105.2 Construction plan requirements. Construction plans shall depict all component characteristics of the proposed design utilized for the EUI in accordance with ASHRAE 90.1 Appendix G. PT105.3 Measured performance report. Projects shall demonstrate compliance with this code by documenting that the building has achieved the EUI performance calculated based on 12 months of metered energy use after occupancy. PT105.3.1 Demonstration of operating energy use. Metered energy data demonstrating compliance with the EUI target shall be reported to the building official using Energy Star Portfolio Manager and adjusted for the percentage of floor area occupied. While at least 75 percent occupied, the building shall operate at or below its assigned energy use target established in Section PT103 for any recording_ period of 12 consecutive months that is completed within three years of the date of the Certificate of Occupancy. The owner shall notify the building official when this 12- month period has been successfully coMpleted. PT106 Energy metering and monitoring. All projects must install submetering or monitoring capabilities to support building energy performance analysis. The project must include capabilities to store and access a 24-month continuous data set on an ongoing basis.