Ordinance 1997-1264 - Laserfiche WebLink

Home Browse Search

3. Screen walls and fences shall be compatible with the adjacent building architecture and their appearance softened with landscape materials to include a mix of evergreen and deciduous shrubs and evergreen trees, as determined necessary by the City. The design and materials for walls and fences shall comply with Section 6.1 of the CDDSG. 4. No chain-link fencing, other open fencing or barbed wire fencing will be allowed. 5. Ground mounted mechanical units and/or the enclosure for such units shall meet the accessory structure setback requirements for the underlying zoning district or, in the event of a PUD, the setbacks set forth in the Final PUD Development Plan for the property . c. Roof mounted mechanical units. 1. Roof mounted mechanical units shall be set back from perimeter building walls to minimize the visual exposure of the units from adjacent buildings and property, streets and sidewalks. 2. The units shall be fully screened with material consistent with building architecture or other existing rooftop screening material. 3. The required screening shall not exceed the height of the existing parapet or other existing mechanical unit screening devices. 9. Parking and Access. a. When full-time personnel are required to maintain the CMRS facility, additional parking shall be provided on the site to meet the CMRS facility's needs. b. When maintenance or servicing is required only on an infrequent basis (regularly scheduled visits once per week or less), then no additional parking shall be required. c. When mechanical support units are ground mounted, their location shall not require the removal of parking areas unless the City determines that the location meets the other design standards in this Chapter, and the removal of parking will leave the property with sufficient parking for other existing and future uses on the site. E. Standards and Guidelines for Alternative Tower Structures (ATS). 8